Formed parts
Professional and watertight construction at the profile ends, as well as for changes in direction and height jumps.
Formed parts options for profile ends
VA.8.95/..
Profile end design upstand h=50 mm
VA.8.95/..
Profile end design upstand h=150 mm
VA.8.95/..
Profile end design end piece h=variable
VA.8.95/..
Corner piece vertical
VA.8.95/..
Profile end design cavetto 45 ° with end piece h=50 mm
VA.8.95/..
Profile end design bevelling h=150 mm
VA.8.95/..F
Profile end design foil lift h=variable
VA.8.95/..F
Profile end design upstand h=150 mm
VA.8.95/..F
Profile end design corner piece vertical h=variable
VA.8.95/..F
End piece h=variable
VA.8.95/..
Corner piece horizontal with transition floor-floor to floor-wall W3 and end piece h=50 mm
VA.8.95/..
T-piece with transition floor-floor to floor-wall W3 and profile end formation end piece h=50 mm
VA.8.95/..
Corner piece horizontal with transition floor-floor to floor-wall W3
VA.8.95/..
Profile end design end piece h=50 mm for floor-wall connection W3 with corner piece horizontal
Formed parts options
The following formed parts are available as standard for all profile types:
- corner piece horizontal 30°-150°
- corner piece vertical
- T-piece
- cross piece
Special fittings on request.
Corner piece horizontal
Example: VA.8.95/20
Corner piece vertical
Example: VA.8.95/20
T-piece
Example: VA.8.95/20
Cross piece
Example: VA.8.95/20
Formed parts options BBF124/55
BBF124/55
Profile end design rounded upstand h=min. 150 mm
BBF124/55
Profile end design cavetto 45° and upstand h=150 mm
BBF124/55
Profile end design foil lift h=variable
BBF124/100 WD
Profile end design foil lift h=variable
BBF124/55 W1
Fitting floor-wall connection if the expansion joint passes directly on rising building components, two corner pieces are required horizontally at the transition from floor-floor to floor-wall (Z-shaped design).
BBF124/55 W4
Fitting Floor-Wall connection if the expansion joint passes directly on rising building components, a fitting profile is required at the transition from floor-floor to floor-wall. A straight (aligned) profile run is therefore given.
BBF124/55
Profile end design upstand h=150 mm for floor-wall connection W1 with corner piece horizontal
BBF124/55
Corner piece horizontal with transition floor-floor to floor-wall W1
Formed parts options kerb
VA.8.95/20
Adapted to the course of the kerb (pavement).
VA.8.110/47 F
Continuous under the kerb (pavement) and covered with non-slip tear plate (on-site).
BBF124/55
Superstructure adapted to the course of the kerb. Loose/fixed flange following the sealing level.